Dave Turley has the following few items for sale:
5 Futaba S3003 servos,
1 Futaba On/Off switch,
3 Futaba 36" servo extensions,
3 Futaba 24" extensions,
1 Futaba 12" extension.
All of this is like new and you can have it all for $50.
Contact Dave at (479) 653-0914
1 Futaba On/Off switch,
3 Futaba 36" servo extensions,
3 Futaba 24" extensions,
1 Futaba 12" extension.
Contact Dave at (479) 653-0914
Cecil Collum has sold a number of airplanes, but says he must sell more to get some needed space in his shop.
I think all of these are pretty much ready to fly but you might call him or email him to be certain
and for any particulars on these planes:
- Sterling PT-17 .60 size in pre-WWII Army colors, Custom Cut Graphics, great flyer ---- $175.00
- 1/4 scale Fokker D-VII, 35cc Quadra, receiver, servos 2500 mAh NIMH, Aces of Iron pilot, Spandau MG 6-58"
vintage wheels ---- $750.00
- Red Zephyr, .40 size, slow flyer ---- $150.00
- "Slow Poke", .25 K&B ---- $100.00
Cecil's contact info is: Phone: 479-926-5786 email: redleg142@hotmail.com
- Sterling PT-17 .60 size in pre-WWII Army colors, Custom Cut Graphics, great flyer ---- $175.00
- 1/4 scale Fokker D-VII, 35cc Quadra, receiver, servos 2500 mAh NIMH, Aces of Iron pilot, Spandau MG 6-58" vintage wheels ---- $750.00
- Red Zephyr, .40 size, slow flyer ---- $150.00
- "Slow Poke", .25 K&B ---- $100.00
Giles Helbling has one of Jim Byers complete Hangar 9 Taylorcraft 20cc ARF airplanes for sale. It is NIB and is a
terrific buy for only $ 300.00
Give Giles a call!
The following information is directly from Hanger 9, but this "original version" may not have every feature mentioned below:
Overview:
Hangar 9's Taylorcraft 20cc ARF is a gorgeous re-creation of a one-of-a-kind full-scale, clipped-wing Taylorcraft built
by renowned aircraft restoration expert, Jim Moss. Ever the innovator, Mr. Moss took a run-of-the-mill Taylorcraft and
turned it into a single-seat hot rod that looks every bit as spectacular as it flies.
Hangar 9 has reproduced this Moss masterpiece in stunning detail with scale touches that include a prepainted cowl
with intakes, an air scoop and louvers, a detailed cockpit, Pitts-style wheel pants, and functioning spring-loaded
landing gear. This 80-inch giant-scale Taylorcraft combines stunning aerobatic capabilities with the stability of a
high-wing aircraft. As with every other Hangar 9 scale ARF, the model is expertly covered in genuine UltraCoteŽ from
wing tip to tail. All necessary hardware is included and the model comes with everything you need to equip it with gas
or glow power.
Key Features:
- Lightweight, all-wood construction
- Authentic UltraCoteŽ sunburst trim scheme
- Detailed cockpit with full-body pilot and working door
- Painted fiberglass cowl with louvered vents and air scoop
- Working spring-loaded landing gear
- Painted Pitts-style fiberglass wheel pants
- Prehinged control surfaces with control horns installed
- Motor mount for electric power included
- Carbon fiber steerable tail wheel assembly
- Two-piece, plug-in wing with clip-on wing struts
- All necessary hardware included
Giles Helbling has one of Jim Byers complete Hangar 9 Taylorcraft 20cc ARF airplanes for sale. It is NIB and is a
terrific buy for only $ 300.00
Give Giles a call!
Hangar 9's Taylorcraft 20cc ARF is a gorgeous re-creation of a one-of-a-kind full-scale, clipped-wing Taylorcraft built by renowned aircraft restoration expert, Jim Moss. Ever the innovator, Mr. Moss took a run-of-the-mill Taylorcraft and turned it into a single-seat hot rod that looks every bit as spectacular as it flies.
Hangar 9 has reproduced this Moss masterpiece in stunning detail with scale touches that include a prepainted cowl with intakes, an air scoop and louvers, a detailed cockpit, Pitts-style wheel pants, and functioning spring-loaded landing gear. This 80-inch giant-scale Taylorcraft combines stunning aerobatic capabilities with the stability of a high-wing aircraft. As with every other Hangar 9 scale ARF, the model is expertly covered in genuine UltraCoteŽ from wing tip to tail. All necessary hardware is included and the model comes with everything you need to equip it with gas or glow power.
Key Features:- Lightweight, all-wood construction
- Authentic UltraCoteŽ sunburst trim scheme
- Detailed cockpit with full-body pilot and working door
- Painted fiberglass cowl with louvered vents and air scoop
- Working spring-loaded landing gear
- Painted Pitts-style fiberglass wheel pants
- Prehinged control surfaces with control horns installed
- Motor mount for electric power included
- Carbon fiber steerable tail wheel assembly
- Two-piece, plug-in wing with clip-on wing struts
- All necessary hardware included